Category Archives: Uncategorized

China Professional High Efficiency Permanent Magnet Variable Speed Screw Air Compressor Jpm Series 7.5kw 11kw 15kw 22kw 30kw 37kw 45kw 55kw 75kw supplier

Product Description

Product Presentation
 

JPM Series Parameter Table
Model Rate Power(kW) Pressure(MPa) F.A.D(m3/min) Size(LxWxH) Connection(Inch) Weight(Kg)
J7.5PM 7.5 0.8 1.1 850X600X980mm G1/2” 165
J7.5PM 7.5 1 0.9 850X600X980mm G1/2” 165
J11PM 11 0.8 1.6 930X750X1205mm G1” 238
J11PM 11 1 1.4 930X750X1205mm G1” 238
J15PM 15 0.8 2.6 930X750X1205mm G1” 238
J15PM 15 1 2.0  930X750X1205mm G1” 238
J22PM 22 0.8 3.6 930X750X1205mm G1” 282
J22PM 22 1 3.0  930X750X1205mm G1” 282
J30PM 30 0.8 5.0  1100X940X1415mm Pp1-1/2” 395
J30PM 30 1 4.3 1100X940X1415mm Pp1-1/2” 395
J37PM 37 0.8 6.5 1100X940X1415mm Pp1-1/2” 458
J37PM 37 1 5.4 1100X940X1415mm Pp1-1/2” 458
J45PM 45 0.8 7.5 1100X940X1415mm Pp1-1/2” 488
J45PM 45 1 6.5 1100X940X1415mm Pp1-1/2” 488
J55PM 55 0.8 10.0  1580X1160X1600mm G2” 860
J55PM 55 1 8.0  1580X1160X1600mm G2” 860
J75PM 75 0.8 12.5 1580X1160X1600mm G2” 930

 

Comparison between permanent magnet motor and ordinary asynchronous motor

Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency

Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are 1 power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.

Single Stage Compression


 

 

Oil cooled machine
Core Ndfeb magnetic steel, not only high temperature 180ºC, and energy efficiency level is higher than IE5. The heat loss is small and the efficiency is high under the same power.

Reliable intake valve system
Unique structural design, reliable intake valve system, do not have to worry about emergency shutdown and sudden power outage oil injection.
The oil and gas pipe of the whole machine are made of stainless steel material or imported hose, which is durable and not aging. It is sealed with thread and flat O-ring, easy to disassemble without leakage.

 

Rear exhaust design to suck instead of blow
Fans dissipate heat faster and make less noise. The traditional fan blows against the cooler, which has large resistance and loud noise. The back row is cooled, and the cooler is placed vertically to avoid the dust falling on the cooler from the top down, which will lead to slow blockage for a long time. This design avoids.

New oil-cooled motor
Mold forming, no welding points, no risk; Rotary oil passage circulation, small pressure difference; It’s a circular surface; Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.

 

Quality Upgrade Three Lightspots

 

 

 

 

 

Company Profile

HangZhou Hylein Energy & Environmental Technology Co., Ltd. is located in HangZhou, Pearl River Delta, known as China’s compressor production base, is a professional engaged in all kinds of screw air compressor, nitrogen machine, oxygen generator, vacuum pump, magnetic suspension compressor R & D, production and sales of manufacturing enterprises, with standard production assembly line, the introduction of Europe and North America mature and experienced technology, Focus on providing a full range of services for various industries.
We strictly follow the IS09001 quality system standards and related industry standards, and throughout the product design, procurement, manufacturing, inspection, sales and service of the entire process, we always adhere to the global procurement strategy to ensure the superior performance of each air compressor, we pay attention to the development of new products, the latest energy-saving products are providing quality services for the global industrial energy-saving cause.
In the ZheJiang -ZheJiang Railway oxygen supply system air compressor project, we overcome high altitude, ultra-low temperature, ultra-high temperature, huge dust, frequent switching power supply and other problems.

After-sales Service

Equipment support High efficiency and energy saving equipment since the start of normal commissioning, to ensure the normal operation of the equipment.

Service scheme Monthly, quarterly regular arrangement of personnel to the user phone or on-site equipment operation inspection, testing work, timely understanding of unit operation dynamics, effective answer to user equipment operation questions, and do the corresponding need to improve maintenance, maintenance, to ensure the long-term effective work of the equipment, while providing service reports every time.

Technical service As long as the user needs equipment and technical help and consultation, the company will accurately reply within 2 hours, and provide the relevant technical information.

Service team We have a CHINAMFG theoretical knowledge, practical ability of strong service team and high-quality management team.

Corresponding time Our company will respond within 2 hours after receiving the notification of the failure of the user’s equipment, provide the fastest solution, and arrange technicians to arrive at the scene as soon as necessary.

Warranty commitment High efficiency and energy saving equipment since the start of normal commissioning, the whole machine warranty for 1 year.

FAQ

 

Q1: What’s your delivery time?

O: It takes about 15 days, if there is any urgent order, please contact us.

 

Q2: How long is your air compressor warranty?

O: One year for the whole machine when the compressor leave our factory.

 

Q3: How about your after-sales service?

O:1. Provide customers with installation and commissioning online instructions.

    2. Well-trained engineers available to overseas service

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 7*24
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Installation Type: Stationary Type
Customization:
Available

|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

  • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
  • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
  • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

  • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
  • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
  • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

  • Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
  • Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

  • Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
  • Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

  • Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
  • Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

  • Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
  • Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

  • Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
  • Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

  • Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
  • Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China Professional High Efficiency Permanent Magnet Variable Speed Screw Air Compressor Jpm Series 7.5kw 11kw 15kw 22kw 30kw 37kw 45kw 55kw 75kw   supplier China Professional High Efficiency Permanent Magnet Variable Speed Screw Air Compressor Jpm Series 7.5kw 11kw 15kw 22kw 30kw 37kw 45kw 55kw 75kw   supplier
editor by CX 2024-05-22

China manufacturer HK-Z48 Scroll Air Compressor with Ce for Medical air compressor CHINAMFG freight

Product Description

Model HK-Z48/08-S1
Operation control mode Pressure start and stop
Rated pressure             (MPa) 0.8
Maximum pressure         ( MPa) 1.0
Air flow                 (M³/min) 4.8
Running speed             ( R/min) 3200
Drive mode Belt drive
Exhaust air temperature      ( ºC  ) ≤ambient temperature  
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil Free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Structure Type: Closed Type
Installation Type: Stationary Type

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China manufacturer HK-Z48 Scroll Air Compressor with Ce for Medical   air compressor CHINAMFG freightChina manufacturer HK-Z48 Scroll Air Compressor with Ce for Medical   air compressor CHINAMFG freight
editor by CX 2024-05-17

China Standard Morden Style Restaurant Dining Chair Outdoor Lounge Chair Rope with CHINAMFG Frame Chair Rope Weaving Outdoor Furniture vacuum pump oil near me

Product Description

Powder coated CHINAMFG frame with rope weaving chair and HPL table combination with or without cushion:

Dining chair: W 53 x D 61 xH 83cm SH 43cm;

Dining table: Dia90 x 75 cm

Color can be customized
Our Modern Balcony Garden Chair is an CHINAMFG choice for those who want to elevate their outdoor space with modern, stylish furniture. The chair features a waterproof fabric woven rope that is durable and weather-resistant, ensuring long-lasting use.
This outdoor chair set comes with a coffee table, providing CHINAMFG space for your outdoor dining or entertainment needs. Its sturdy steel frame makes it stable and durable while ensuring maximum CHINAMFG while lounging or dining.
The modern design of this balcony garden chair set complements any outdoor setting, adding elegance and functionality to your patio or garden. Its easy-to-clean surface makes maintenance hassle-free, making it suitable for those who want practical and stylish furniture for their outdoor oasis.
We take pride in offering customizable options to meet the unique needs of each of our clients. Our team is committed to delivering high-quality products and exceptional service to help you elevate your outdoor experience with our high-quality gear.
Contact us today to learn more about our Modern Balcony Garden Chair Outdoor Waterproof Fabric Woven Rope Outdoor Chair with Coffee Table Set Patio Outdoor Furniture Dining Chair and let us help you create the perfect outdoor CHINAMFG for relaxation and comfort.
Contact Information:
Company Name: HangZhou CHINAMFG Furniture Co.,Ltd
Add: Lousha Industrial Zone, Lecong, Xihu (West Lake) Dis. District, HangZhou, China.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Rope
Style: Simple
Folded: Unfolded
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

oudoor furniture

What are the best practices for assembling and maintaining outdoor furniture with glass tops?

Assembling and maintaining outdoor furniture with glass tops requires careful attention to ensure proper installation and long-term durability. Here are some best practices to consider:

1. Assembling Outdoor Furniture:

Follow the manufacturer’s instructions carefully when assembling outdoor furniture with glass tops. Ensure that all parts are correctly aligned and securely fastened to prevent any instability or accidents.

2. Handle with Care:

When handling glass tops, wear protective gloves and take care to avoid dropping or banging them against hard surfaces. Glass can be fragile, so handle it with caution to prevent cracks or damage.

3. Use Protective Pads or Cushions:

Place protective pads or cushions between the glass top and the frame to prevent direct contact and reduce the risk of scratches or chipping. These pads also help provide stability and prevent the glass from sliding or shifting.

4. Avoid Excessive Weight or Pressure:

Avoid placing excessive weight or applying strong pressure on the glass top. Glass can be susceptible to breaking or cracking under heavy loads or impact. Use caution when placing objects on the surface and avoid sitting or standing on the glass top.

5. Clean Regularly:

Regularly clean the glass top using a mild glass cleaner and a soft, non-abrasive cloth or sponge. Avoid using harsh chemicals or abrasive materials that can scratch or damage the glass. Wipe away any spills or debris promptly to prevent staining.

6. Protect from Extreme Temperatures:

Avoid exposing outdoor furniture with glass tops to extreme temperature changes. Sudden temperature variations can cause the glass to expand or contract, leading to potential cracking or breakage. Consider using protective covers or moving the furniture to a shaded area during extreme weather conditions.

7. Inspect for Damage:

Regularly inspect the glass top for any signs of damage, such as cracks, chips, or loose fittings. If you notice any issues, address them promptly. Repair or replace the glass as necessary to maintain the integrity and safety of the furniture.

8. Store During Winter or Inclement Weather:

If possible, store outdoor furniture with glass tops indoors or in a covered area during the winter or periods of inclement weather. This protects the glass from potential damage caused by freezing temperatures, snow, or heavy rain.

9. Follow Safety Guidelines:

Adhere to safety guidelines provided by the manufacturer and any local regulations regarding the use and maintenance of outdoor furniture with glass tops. These guidelines may include weight restrictions, recommended cleaning methods, or other specific instructions to ensure safe and proper use.

By following these best practices, you can assemble and maintain outdoor furniture with glass tops effectively, promoting longevity and enjoyment of your outdoor living space.

oudoor furniture

How can I make my outdoor furniture more comfortable with accessories?

If you’re looking to enhance the comfort of your outdoor furniture, there are various accessories you can consider. Here are some ways to make your outdoor furniture more comfortable:

1. Cushions and Pillows: Adding cushions and pillows is one of the easiest ways to make outdoor seating more comfortable. Look for cushions specifically designed for outdoor use, as they are typically made with durable and weather-resistant materials. Choose cushions and pillows in soft, water-resistant fabrics that complement your outdoor décor.

2. Outdoor Rugs: Placing an outdoor rug beneath your furniture can add both comfort and style to your outdoor space. Outdoor rugs provide a soft surface underfoot, making the seating area more inviting. Opt for rugs made from materials that can withstand outdoor conditions, such as polypropylene or natural fibers like sisal or jute.

3. Umbrellas or Shade Sails: If your outdoor space is exposed to direct sunlight, consider adding umbrellas or shade sails to provide shade and relief from the sun’s rays. This can help create a more comfortable and enjoyable seating area, especially during hot summer days. Look for umbrellas or shade sails that are adjustable and made from UV-resistant materials.

4. Outdoor Curtains: Installing outdoor curtains around your seating area can add privacy, create a sense of enclosure, and provide shade. Choose curtains made from outdoor-rated fabrics that are resistant to fading and mildew. You can also opt for sheer curtains to allow for airflow while still providing some privacy.

5. Mosquito Netting: If you frequently deal with mosquitoes or other insects, consider using mosquito netting around your outdoor furniture. This can help create a bug-free zone, allowing you and your guests to relax comfortably without being bothered by pests. Look for netting that is specifically designed for outdoor use and easy to install.

6. Outdoor Throw Blankets: For cooler evenings or during transitional seasons, provide cozy comfort by offering outdoor throw blankets. These can be made from weather-resistant materials or outdoor-friendly fabrics that are easy to clean. Place the blankets on the back of chairs or in a basket nearby for guests to use as needed.

7. Outdoor Lighting: Proper lighting can contribute to the overall comfort and ambiance of your outdoor space. Install outdoor lighting fixtures such as string lights, lanterns, or sconces to create a warm and inviting atmosphere. This will not only enhance the comfort but also extend the usability of your outdoor furniture into the evening hours.

Remember to choose accessories that are specifically designed for outdoor use and can withstand the elements. Regular cleaning and maintenance of the accessories will help ensure their longevity and continued comfort.

oudoor furniture

What are the benefits of investing in high-quality outdoor furniture?

Investing in high-quality outdoor furniture offers numerous benefits that make it a worthwhile investment. Here are the key advantages of choosing high-quality outdoor furniture:

1. Durability and Longevity: High-quality outdoor furniture is built to withstand the elements and is often made from durable materials. It can resist fading, rusting, warping, and other forms of damage caused by sun exposure, rain, wind, or temperature fluctuations. Investing in durable furniture ensures it lasts for many years, saving you money in the long run.

2. Comfort and Ergonomics: High-quality outdoor furniture is designed with comfort in mind. It often includes features such as ergonomic shapes, supportive cushions, and adjustable components. You and your guests can enjoy the outdoor space comfortably, whether you’re lounging, dining, or socializing.

3. Enhanced Aesthetics: High-quality outdoor furniture tends to have better craftsmanship and attention to detail, resulting in a more attractive and visually appealing appearance. It can elevate the aesthetic appeal of your outdoor space, creating a stylish and inviting atmosphere.

4. Low Maintenance: High-quality outdoor furniture typically requires less maintenance compared to lower-quality alternatives. It is often designed to be resistant to stains, fading, and other forms of wear and tear, reducing the need for frequent cleaning or repairs. This saves you time and effort in maintaining your outdoor furniture.

5. Functionality and Versatility: High-quality outdoor furniture often offers a range of functional features and versatile designs. It may include modular components, adjustable settings, or multi-purpose functionality, allowing you to adapt the furniture to different activities or changing needs. This flexibility enhances the usability and practicality of your outdoor space.

6. Warranty and Customer Support: High-quality outdoor furniture is often backed by warranties from the manufacturer or retailer. This provides peace of mind, as you can rely on the warranty to address any manufacturing defects or issues that may arise. Additionally, reputable brands that offer high-quality furniture often have good customer support, ensuring you receive assistance if needed.

7. Value and Investment: While high-quality outdoor furniture may have a higher upfront cost, it offers better value and return on investment over time. The durability, longevity, and overall performance of high-quality furniture make it a wise investment that can withstand the test of time and provide enjoyment for years to come.

By investing in high-quality outdoor furniture, you can create a comfortable, durable, and visually appealing outdoor space that enhances your lifestyle and adds value to your home.

editor by CX 2024-05-17

China OEM 8 Bar 220V Lubricated Piston Air Compressors Direct Driven Air Compressor with Best Sales

Product Description

8 Bar 220V Lubricated Piston Air Compressors Direct Driven Air Compressor

Product Parameters

Name Direct driven Air Compressor
Applicable Industries Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location None
Machinery Test Report Provided
Video outgoing-inspection Provided
Marketing Type Other
Core Components Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type     Air
Configuration PORTABLE
Power Source     AC POWER
Type PISTON
Lubrication Style Lubricated
Mute Yes
Voltage 220V
Dimension(L*W*H) 59*29*64
OEM Welcomed

Model name

Delivery rate at 0 bar

Max. pressure

  Tank

Pump

Motor input

Voltage

     Speed

XLBM-24

210L/min

8 bar 115psi

24L

1048

1.8 KW

220 V

2800RPM

Product Display

Company Profile

Founded in 2002, ZHangZhoug CHINAMFG Electromechanical Co., Ltd. focus on manufacturing air compressors for more than 15 years.
Our company is located in Daxi Pump Industrial Area, HangZhou City, ZHangZhoug, China. having more than 15000 square meter working area. We specialize in all kinds of piston air compressors, especially having advantages in our new advanced heavy-duty oil-free
air compressors.

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q3: Can I get a sample to check the quality?
A: We are glad to offer you samples for test. Leave us message of the item you want or your requirements. We will reply you within 24 hours in working time.

Q4: I am buying from another supplier, but need better service, would you match or beat the price I am paying?
A: We always feel we provide the best service and competitive prices. We would be more than happy to personalize a competitive quote for you, just email us.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Customization:
Available

|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

China OEM 8 Bar 220V Lubricated Piston Air Compressors Direct Driven Air Compressor   with Best SalesChina OEM 8 Bar 220V Lubricated Piston Air Compressors Direct Driven Air Compressor   with Best Sales
editor by CX 2024-05-17

China OEM Modern Design Outdoor Garden Sofas CHINAMFG Frame Furniture Sofa vacuum pump engine

Product Description

 

Product Description

 

 

 

Product Name Outdoor furniture
Brand KURY
Design Style Modern
Main Material Aluminum ,Teak Wood,Rope,PE Rattan
Fabric 100% solution-dyed and water repellent outdoor fabric
Colour Different color available
Place of Product ZheJiang Province,China
Warranty 2-5 years
Delivery Time 25 days
MOQ 1 set (Samples, OEM and ODM services available.)

Company Profile

FAQ

1.What’s your MOQ?
1 set ( Samples, OEM and ODM services available.)

2.Can I buy samples placing orders?
Yes.Please feel free to contact us.

3.How can I get the price?
The price is negotiable,please provide us with more details like quantity preference,etc.We usually quote within
24 hours after we get your inquiry. If you are very urgent to get the price, please email us or contact us in other
ways so that we can offer you a quote.

4.What’s your main market?
In the past several years, our annual production and sales of more than 150,000 pieces of outdoor furniture,
export to more than 80 countries and regions in North America, Europe, the Middle East and Southeast Asia.

5.Could you offer customize service?
Yes, OEM and ODM services available. What is your lead time? It depends on the order quantity and the
season you place the order. Usually we can ship within 20-30 days for large quantity.

6.What is your payment term?
Normally we can provide TT, LC,PAYPAL ect.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Fabric
Frame Material: Metal
Style: Modern
Type: Combination
Usage: Garden
Folded: Unfolded
Customization:
Available

|

oudoor furniture

How do I protect my aluminum garden furniture from sun exposure and fading?

To protect your aluminum garden furniture from sun exposure and fading, you can take the following measures:

1. Use Protective Covers:

When your aluminum furniture is not in use, consider covering it with protective covers specifically designed for outdoor furniture. These covers shield the furniture from direct sunlight and help prevent fading. Make sure the covers are properly fitted and secure to withstand wind and other weather conditions.

2. Provide Shade:

If possible, position your furniture in shaded areas of your garden or use umbrellas, awnings, or pergolas to create shade. This will reduce direct exposure to intense sunlight and minimize the risk of fading.

3. Apply Protective Finishes:

Consider applying protective finishes, such as clear coats or sealants, to your aluminum furniture. These finishes can provide an additional layer of protection against UV rays and help maintain the original color of the furniture.

4. Move Furniture to Shaded Areas:

If your furniture is lightweight and portable, you can move it to shaded areas when the sun is at its strongest. This allows you to control the amount of sun exposure your furniture receives and reduce the risk of fading.

5. Clean and Maintain Regularly:

Regular cleaning and maintenance are essential for preserving the appearance of your aluminum furniture. Use a mild detergent and water to clean the furniture, removing any dirt, debris, or stains. Avoid using abrasive cleaners or brushes that may scratch the surface. By keeping your furniture clean, you can prevent dirt buildup that can contribute to fading.

6. Use UV-Protective Fabrics:

If your aluminum furniture has cushions or upholstery, opt for fabrics that offer UV protection. Look for outdoor fabrics specifically designed to resist fading and damage from sunlight. UV-protective fabrics will help prolong the lifespan of your cushions and maintain their vibrant colors.

7. Store Furniture During Long Periods of Non-Use:

If you anticipate long periods of non-use, such as during the winter or when you’re away on vacation, consider storing your aluminum furniture in a covered and dry area to protect it from prolonged sun exposure.

By implementing these protective measures, you can help protect your aluminum garden furniture from sun exposure and fading, ensuring that it remains in good condition and retains its aesthetic appeal for years to come.

oudoor furniture

Can I find aluminum garden furniture sets that are both stylish and easy to clean?

Yes, you can find aluminum garden furniture sets that are both stylish and easy to clean. Aluminum is a popular choice for outdoor furniture due to its durability, versatility, and low maintenance requirements. Here’s why aluminum garden furniture sets can offer a combination of style and easy cleaning:

1. Stylish Designs:

Aluminum garden furniture sets come in a wide range of stylish designs to suit different tastes and preferences. Whether you prefer modern, contemporary, traditional, or rustic styles, there are aluminum furniture sets available to complement your outdoor decor. The versatility of aluminum allows for various design elements, including sleek lines, intricate patterns, and decorative details.

2. Finishes and Colors:

Aluminum furniture sets often feature different finishes and colors to enhance their visual appeal. They can be powder coated, painted, or anodized to provide a desired look and protection against the elements. Powder coating, in particular, offers a durable finish that comes in a wide array of colors, allowing you to choose a shade that matches your style and preferences. Whether you prefer vibrant hues, neutral tones, or metallic finishes, there are options available to suit your aesthetic.

3. Low Maintenance:

Aluminum garden furniture sets are known for their low maintenance requirements. Aluminum is naturally resistant to rust and corrosion, making it well-suited for outdoor use. Unlike other materials, such as wood or wrought iron, aluminum does not require regular staining, sealing, or painting to maintain its appearance and structural integrity. To clean aluminum furniture, simply wipe it down with a mild soap and water solution, rinse thoroughly, and let it air dry. This straightforward cleaning process allows you to enjoy your furniture without spending excessive time and effort on maintenance.

4. Weather Resistance:

Aluminum is highly resistant to weathering, which contributes to its easy cleaning and maintenance. It does not warp, crack, or fade when exposed to sunlight, rain, or humidity. The smooth and non-porous surface of aluminum makes it less prone to dirt, mold, and mildew buildup. This means that cleaning can often be as simple as removing surface debris and giving it a quick wipe down, keeping your furniture looking clean and fresh.

5. Durability:

Aluminum garden furniture sets are known for their durability. Aluminum is lightweight yet sturdy, allowing for easy rearrangement and transportation of your furniture. It is resistant to impact, making it less likely to dent or deform over time. The durability of aluminum ensures that your furniture will maintain its stylish appearance and functionality for years to come.

When shopping for aluminum garden furniture sets, look for reputable manufacturers or brands that offer high-quality craftsmanship and materials. Read product descriptions, customer reviews, and consider visiting physical stores or showrooms to assess the style, comfort, and quality of the furniture sets firsthand.

By choosing a stylish aluminum garden furniture set and following simple cleaning practices, you can create an inviting outdoor space that is both aesthetically pleasing and easy to maintain.

oudoor furniture

What are the benefits of choosing aluminum garden furniture for outdoor spaces?

Choosing aluminum garden furniture for outdoor spaces offers several benefits. Aluminum is a popular material for outdoor furniture due to its unique characteristics and advantages. Here are some of the benefits of choosing aluminum garden furniture:

1. Lightweight and Easy to Move:

One of the significant advantages of aluminum garden furniture is its lightweight nature. Aluminum is much lighter than materials like iron or steel, making it easy to move and rearrange the furniture as needed. This lightweight property is especially beneficial if you frequently rearrange your outdoor space or need to store the furniture during certain seasons.

2. Rust-Resistant:

Aluminum is naturally rust-resistant, which makes it an excellent choice for outdoor furniture. Unlike iron or steel, which may require regular maintenance to prevent rust, aluminum does not rust. This resistance to rust ensures that your aluminum furniture can withstand exposure to various weather conditions, including rain and humidity, without corroding.

3. Durable and Long-Lasting:

Aluminum garden furniture is known for its durability and longevity. It is a sturdy material that can withstand the rigors of outdoor use. Aluminum furniture is resistant to cracking, warping, and bending, ensuring that it maintains its structural integrity over time. With proper care and maintenance, aluminum furniture can last for many years, providing you with long-lasting enjoyment.

4. Low Maintenance:

Another advantage of aluminum garden furniture is its low maintenance requirements. Unlike wooden furniture that may require staining or sealing, or iron furniture that may need regular painting or coating, aluminum furniture is relatively easy to maintain. It can be cleaned with mild soap and water or a gentle household cleaner. Additionally, aluminum furniture does not require any specific treatments or coatings to maintain its appearance and durability.

5. Versatile Design Options:

Aluminum garden furniture is available in a wide range of design options to suit various tastes and styles. Whether you prefer a modern, contemporary look or a more traditional aesthetic, you can find aluminum furniture that fits your outdoor space. Aluminum can be shaped and formed into different styles and designs, allowing for versatility in the appearance of the furniture.

6. Environmentally Friendly:

Aluminum is a highly recyclable material, making it an environmentally friendly choice for garden furniture. Choosing aluminum furniture supports sustainable practices by reducing the demand for new materials and minimizing waste. Additionally, aluminum furniture can be recycled at the end of its life cycle, further reducing its environmental impact.

Overall, aluminum garden furniture offers numerous benefits, including lightweight portability, rust resistance, durability, low maintenance, versatile design options, and environmental friendliness. These advantages make aluminum an attractive option for outdoor spaces, allowing you to create a stylish and long-lasting outdoor seating area.

editor by CX 2024-05-17

China supplier Hotel Furniture Outdoor Courtyard Rope Table Chair Combination Garden Balcony Leisure Dining Set vacuum pump ac

Product Description

Product Description

 

 
 

Main Materials Teak wood ,Aluminum,Plastic Wood,Rope,PE Rattan
Cushion High density foam and Quick Dry Foam.

Outdoor waterproof and UV resistant Fabric

Size Chair:58*64*78CM
Table:45*45*55CM
Chair Description Aluminum frame with outdoor using powder coating,rope weaving,with waterproof outdoor using fabric cushion
Table Description Aluminum frame with outdoor using powder coating,tempered glass countertop
Packing 1. standard export packaging
2. Mail order packing
MOQ 1 Sets.
mixed order acceptable sample order available
Delivery 1. Sample order(7~15 days)
2. 20GP & 40HQ(20~25 days)
Warranty 3-5 years

Company Profile

 

FAQ

1.What’s your MOQ?
1 set ( Samples, OEM and ODM services available.)

2.Can I buy samples placing orders?
Yes.Please feel free to contact us.

3.How can I get the price?
The price is negotiable,please provide us with more details like quantity preference,etc.We usually quote within
24 hours after we get your inquiry. If you are very urgent to get the price, please email us or contact us in other
ways so that we can offer you a quote.

4.What’s your main market?
In the past several years, our annual production and sales of more than 150,000 pieces of outdoor furniture,
export to more than 80 countries and regions in North America, Europe, the Middle East and Southeast Asia.

5.Could you offer customize service?
Yes, OEM and ODM services available. What is your lead time? It depends on the order quantity and the
season you place the order. Usually we can ship within 20-30 days for large quantity.

6.What is your payment term?
Normally we can provide TT, LC,PAYPAL ect.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Metal
Style: Modern
Usage: Hotel, Outdoor
Folded: Unfolded
Customized: Customized
Condition: New
Samples:
US$ 56/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

oudoor furniture

Can I leave my garden furniture outside year-round, or should I store it?

Whether you can leave your garden furniture outside year-round or need to store it depends on several factors, including the type of furniture, the materials it’s made of, and the climate in your area. Here are some considerations to help you decide:

1. Furniture Material:

Different furniture materials have varying levels of durability and resistance to weather conditions. Some materials, like aluminum or teak, are more resistant to moisture, UV rays, and temperature fluctuations, making them suitable for year-round outdoor use. Other materials, such as certain types of wood or wicker, may require more protection and maintenance and might be better stored during harsh weather.

2. Climate:

The climate in your area plays a significant role in determining whether you can leave your garden furniture outside year-round. If you live in a region with mild and temperate weather throughout the year, it may be possible to keep your furniture outdoors. However, if you experience extreme temperatures, heavy rain, snow, or high humidity, it’s generally advisable to store your furniture during the harshest seasons to protect it from potential damage.

3. Maintenance and Protection:

Proper maintenance and protection can significantly extend the lifespan of your outdoor furniture. Even if your furniture is designed for outdoor use, regular cleaning and applying protective treatments, such as sealants or weather-resistant coatings, can help maintain its appearance and durability. However, if you’re unable to provide regular maintenance or protection, storing your furniture during unfavorable weather conditions can help preserve its condition.

4. Available Storage Space:

Consider the availability of storage space when deciding whether to store your garden furniture. If you have ample storage space, storing your furniture during the off-seasons can offer maximum protection and prolong its lifespan. However, if storage space is limited or not available, you may need to explore other options, such as using furniture covers or finding creative ways to protect your furniture from the elements.

5. Personal Preference:

Ultimately, your personal preference and priorities should also be considered. If you value having your garden furniture readily available for use throughout the year and are willing to invest in the necessary maintenance and protection, you may choose to leave it outside. On the other hand, if you prefer the peace of mind and convenience of storing your furniture during unfavorable weather, that may be the best option for you.

It’s important to note that even if your furniture is designed for outdoor use and you decide to leave it outside year-round, it’s still advisable to take precautions, such as using furniture covers, securing the furniture during storms, or moving it to a sheltered area when extreme weather is expected.

Ultimately, the decision to leave your garden furniture outside year-round or store it depends on the specific circumstances and considerations mentioned above. Assess the factors relevant to your situation and choose the option that best suits your furniture, climate, and personal preferences.

oudoor furniture

Are there any sustainable or recycled garden furniture options available?

Yes, there are several sustainable and recycled options available for garden furniture. These eco-friendly alternatives help reduce the environmental impact of furniture production and promote the use of recycled materials. Here are some examples:

1. Reclaimed Wood:

Reclaimed wood is sourced from old structures, such as barns, warehouses, and railway sleepers, and repurposed into garden furniture. Using reclaimed wood helps reduce the demand for new timber and minimizes deforestation. Additionally, it adds a rustic and unique character to the furniture.

2. Recycled Plastic:

Garden furniture made from recycled plastic is a popular sustainable choice. It is typically manufactured from post-consumer plastic waste, such as recycled bottles and packaging materials. Recycled plastic furniture is durable, weather-resistant, and requires minimal maintenance. By using recycled plastic, it helps reduce plastic waste and promotes a circular economy.

3. Bamboo:

Bamboo is a fast-growing and highly renewable material that can be used to make garden furniture. It has a similar appearance to wood and offers comparable strength and durability. Bamboo furniture is often treated to withstand outdoor conditions and can provide a sustainable alternative to traditional wood furniture.

4. Metal Furniture with Recycled Content:

Some metal garden furniture is manufactured using recycled metal content. This involves using recycled metals, such as aluminum or steel, in the production process. Choosing metal furniture with recycled content helps reduce the energy and resource requirements associated with mining and refining new metals.

5. Upcycled Furniture:

Upcycled garden furniture involves transforming discarded or old furniture into new, functional pieces. This can include refurbishing and repainting existing furniture or creatively repurposing materials to create unique designs. Upcycling reduces waste and gives new life to furniture that might have otherwise been discarded.

6. Sustainable Certification:

Look for garden furniture that carries sustainable certifications or labels, such as Forest Stewardship Council (FSC) certification for wood products. These certifications indicate that the furniture is sourced from responsibly managed forests or meets specific sustainability standards.

7. Local and Artisanal Options:

Consider purchasing garden furniture from local artisans or craftsmen who prioritize sustainable practices. Local sourcing reduces transportation emissions, supports local economies, and allows for direct communication with the makers to ensure sustainable production methods.

When selecting sustainable or recycled garden furniture, it’s important to ensure that the materials used are durable and suitable for outdoor environments. Additionally, consider the overall lifecycle of the furniture, including its end-of-life disposal options.

By choosing sustainable or recycled garden furniture, you can contribute to a more environmentally friendly outdoor space while still enjoying beautiful and functional furniture.

oudoor furniture

What are the benefits of investing in high-quality garden furniture?

Investing in high-quality garden furniture offers numerous benefits that can enhance your outdoor living experience and provide long-term value. Here are some advantages of choosing high-quality garden furniture:

1. Durability and Longevity:

High-quality garden furniture is built to last. It is constructed using robust materials and superior craftsmanship, making it more resistant to wear, tear, and weather conditions. Investing in durable furniture ensures that it will withstand outdoor elements and remain in good condition for years to come.

2. Enhanced Comfort:

High-quality garden furniture often prioritizes comfort. It features ergonomic designs, ample cushions, and supportive features that provide a comfortable seating or lounging experience. The use of high-quality materials and cushioning ensures that you can relax and enjoy your outdoor space in utmost comfort.

3. Aesthetics and Style:

High-quality garden furniture often boasts stylish designs and meticulous attention to detail. It can elevate the overall aesthetics of your outdoor space, creating a visually pleasing and inviting environment. From modern and contemporary to traditional and rustic styles, high-quality furniture offers a wide range of options to suit your personal taste and complement your outdoor decor.

4. Functionality and Versatility:

Investing in high-quality garden furniture provides you with functional and versatile pieces. Whether you need a dining set for outdoor meals, a comfortable seating area for entertaining guests, or a cozy lounge spot for relaxation, high-quality furniture offers the functionality and versatility to meet your specific needs. Many pieces also come with adjustable features or modular designs for added convenience.

5. Low Maintenance:

High-quality garden furniture often requires minimal maintenance. It is designed to withstand outdoor conditions and is resistant to fading, rust, moisture, and other common issues. With proper care and occasional cleaning, high-quality furniture can maintain its appearance and functionality without extensive upkeep.

6. Investment Value:

High-quality garden furniture is an investment that provides long-term value. While it may have a higher upfront cost compared to lower-quality alternatives, its durability and longevity ensure that you won’t need to replace it frequently. Investing in quality furniture ultimately saves you money in the long run.

7. Enjoyment and Relaxation:

Perhaps the most significant benefit of investing in high-quality garden furniture is the enjoyment and relaxation it brings. With comfortable seating, a beautiful design, and a well-crafted outdoor space, you can create a serene and inviting oasis where you can unwind, entertain, and spend quality time with family and friends.

When choosing high-quality garden furniture, consider factors such as the materials used, construction techniques, and reputable brands. Take the time to research and select furniture that meets your specific needs and preferences. By investing in high-quality furniture, you can create an outdoor space that is not only aesthetically pleasing but also functional, comfortable, and built to last.

editor by CX 2024-05-17

China Best Sales Wholesale Modern Design Outdoor Garden Patio Combination Furniture CHINAMFG Sofa wholesaler

Product Description

Detailed Photos

Outdoor sofas include their weather resistance, comfort, durability, low maintenance, stylish designs, space utilization, versatility, role as a social hub, potential for value addition, and eco-friendly options. These factors collectively contribute to the popularity of outdoor sofas in enhancing outdoor living spaces.

1. Weather Resistance: Outdoor sofas are designed to withstand various weather conditions, including sunlight, rain, and wind. They are often made from materials that resist fading, moisture, and damage caused by exposure to the elements.

2. Comfortable Seating: Well-crafted outdoor sofas prioritize comfort, offering plush cushions and ergonomic designs. This makes them ideal for relaxation and socializing in outdoor settings.

3. Durability: High-quality materials used in outdoor sofas contribute to their durability. They are built to endure frequent use and the challenges of outdoor environments, ensuring a longer lifespan.

4. Low Maintenance: Outdoor sofas are generally easy to clean and maintain. Stain-resistant fabrics, removable cushion covers, and weather-resistant materials simplify the upkeep, making them practical for outdoor use.

5. Stylish Designs: Outdoor sofas come in a variety of styles, colors, and designs, catering to diverse aesthetic preferences. This allows homeowners to choose pieces that complement their outdoor decor and personal taste.

6. Space Utilization: Outdoor sofas provide a comfortable seating option that maximizes the use of outdoor space. They help transform patios, decks, and gardens into functional and inviting areas for socializing or relaxation.

7. Versatility: Outdoor sofas can be part of a larger outdoor furniture set or stand alone, providing flexibility in how they are arranged and used. This versatility allows for creative and customizable outdoor living spaces.

8. Social Gathering Hub: Outdoor sofas create a focal point for socializing and gathering. Whether hosting a barbecue, family gathering, or casual get-together, these pieces of furniture enhance the overall outdoor experience.

9. Value Addition: Investing in outdoor sofas can add value to a property. A well-designed outdoor space, complete with comfortable seating, can make a home more appealing to potential buyers or renters.

10. Eco-Friendly Options: Some outdoor sofas are made from environmentally friendly materials, appealing to those who prioritize sustainability and eco-conscious choices.

Material Wood,Aluminum, Rattan,Rope,fabric,
Advantages 1. Professional services.(12 years of factory experience)
2. pretty competitive price. (Ex-factory price)
3.OEM is available.(OEM and ODM one-stop service)
Useage garden, hotel and so on Advantages
Package Standard export carton and wood frame, with EPE foam inside to protect edges.
Style Modern
Color Color can be optional
Lead Time 20-25 days after deposit received
Payment terms 30% deposit T/T, 70% need paied before delivery
Quality Control 100 % inspection before packing

Q1. Any discount?
A1. At first, the price we quote are all wholesale price. Meanwhile, our best price will be offered according to the order quantity. So please tell us your purchase quantity when you inquire.I believe we can meet your need perfectly with competitive price and high quality.

 

Q2. Can I have a sample order?
A2. Yes, samples are available if necessary. Yet for consideration of saving postage, we also provide detailed pictures and other documents you require to smooth your concern as an alternative solution.

 

Q3. How long is the delivery time?
A3. Normally it will only take about 8-30 days according to type of product and quantity of your order.

 

Q4. How to deal with the faulty?
A4. Firstly, our products are produced in strict quality control system and the defective rate is very low.

Secondly, during the guarantee period, we will send replacement for free.

 

Q5. What can I do if the item is damaged during transportation?
A5. Our customer service staffs will help you with any questions or concerns. Under any circumstance, We will take well packed products pictures before shipping. So if any damage on products, please take pictures for us.

 

Q6.Are you manufacturer or trade company?

A6- We are the Manufacture/Factory.

 

Q7. Why choose our company ?

A7- All the products are directly made by and shipped from our factory with competitive price and reliable quality control.

– We have skillful technician production team and inspection team, to ensure delivery qualified product on time.

– To our regular customers, they may have a VIP price.

– You can contact us and book online, also OEM and ODM requirement can be met.

 

– We welcome to all clients visit our factory.

– Professional team to provide good after-sale service.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Style: Modern
Type: Combination
Usage: Bar, Cafe, Restaurant
Folded: Folded
Customized: Customized
Condition: New
Customization:
Available

|

oudoor furniture

What are the latest trends in aluminum garden furniture designs and styles?

The world of aluminum garden furniture is constantly evolving, and there are several exciting trends in designs and styles. Here are some of the latest trends:

1. Minimalist and Contemporary:

Minimalist designs with clean lines and sleek profiles are gaining popularity. Contemporary aluminum furniture often features minimalist aesthetics, emphasizing simplicity and functionality. These designs create a modern and uncluttered look in outdoor spaces.

2. Mixed Materials:

Combining aluminum with other materials, such as wood, rope, or fabric, is a popular trend. This fusion of materials adds visual interest and texture to the furniture. For example, aluminum frames paired with wooden accents can create a warm and natural feel.

3. Outdoor Lounge Sets:

Lounge sets are in high demand, offering comfortable seating arrangements for relaxation and socializing outdoors. These sets often include sofas, club chairs, ottomans, and coffee tables. Aluminum lounge sets with plush cushions provide a luxurious and inviting outdoor seating experience.

4. Modular and Sectional Designs:

Modular and sectional furniture allows for versatility and customization. Aluminum garden furniture with modular designs enables users to rearrange seating configurations based on their needs and preferences. This flexibility is especially appealing for those who like to change their outdoor layout frequently.

5. Curved and Organic Shapes:

Furniture with curved or organic shapes adds a touch of elegance and softness to outdoor spaces. Aluminum garden furniture featuring rounded edges, curved backs, or flowing contours creates a more inviting and comfortable atmosphere.

6. Bold Colors:

While classic neutral tones remain popular, bold colors are making a statement in aluminum furniture designs. Vibrant shades like deep blues, rich greens, and warm oranges are being used to add personality and create focal points in outdoor settings.

7. Sustainable and Eco-Friendly Designs:

In line with the growing emphasis on sustainability, there is an increasing demand for eco-friendly aluminum furniture designs. Manufacturers are incorporating sustainable materials, such as recycled aluminum and responsibly sourced wood, and adopting environmentally conscious production practices.

8. Outdoor Dining Sets:

Outdoor dining sets continue to be a staple in aluminum furniture designs. These sets typically include a dining table and matching chairs, providing comfortable and stylish seating for outdoor meals and gatherings. Designs range from traditional to modern, catering to various aesthetic preferences.

These are just a few of the latest trends in aluminum garden furniture designs and styles. Whether you prefer minimalist, mixed materials, lounge sets, modular designs, curved shapes, bold colors, sustainable options, or outdoor dining sets, there is a wide range of options available to suit your personal taste and create a stylish outdoor living space.

oudoor furniture

Can I find aluminum garden furniture sets that are both stylish and easy to clean?

Yes, you can find aluminum garden furniture sets that are both stylish and easy to clean. Aluminum is a popular choice for outdoor furniture due to its durability, versatility, and low maintenance requirements. Here’s why aluminum garden furniture sets can offer a combination of style and easy cleaning:

1. Stylish Designs:

Aluminum garden furniture sets come in a wide range of stylish designs to suit different tastes and preferences. Whether you prefer modern, contemporary, traditional, or rustic styles, there are aluminum furniture sets available to complement your outdoor decor. The versatility of aluminum allows for various design elements, including sleek lines, intricate patterns, and decorative details.

2. Finishes and Colors:

Aluminum furniture sets often feature different finishes and colors to enhance their visual appeal. They can be powder coated, painted, or anodized to provide a desired look and protection against the elements. Powder coating, in particular, offers a durable finish that comes in a wide array of colors, allowing you to choose a shade that matches your style and preferences. Whether you prefer vibrant hues, neutral tones, or metallic finishes, there are options available to suit your aesthetic.

3. Low Maintenance:

Aluminum garden furniture sets are known for their low maintenance requirements. Aluminum is naturally resistant to rust and corrosion, making it well-suited for outdoor use. Unlike other materials, such as wood or wrought iron, aluminum does not require regular staining, sealing, or painting to maintain its appearance and structural integrity. To clean aluminum furniture, simply wipe it down with a mild soap and water solution, rinse thoroughly, and let it air dry. This straightforward cleaning process allows you to enjoy your furniture without spending excessive time and effort on maintenance.

4. Weather Resistance:

Aluminum is highly resistant to weathering, which contributes to its easy cleaning and maintenance. It does not warp, crack, or fade when exposed to sunlight, rain, or humidity. The smooth and non-porous surface of aluminum makes it less prone to dirt, mold, and mildew buildup. This means that cleaning can often be as simple as removing surface debris and giving it a quick wipe down, keeping your furniture looking clean and fresh.

5. Durability:

Aluminum garden furniture sets are known for their durability. Aluminum is lightweight yet sturdy, allowing for easy rearrangement and transportation of your furniture. It is resistant to impact, making it less likely to dent or deform over time. The durability of aluminum ensures that your furniture will maintain its stylish appearance and functionality for years to come.

When shopping for aluminum garden furniture sets, look for reputable manufacturers or brands that offer high-quality craftsmanship and materials. Read product descriptions, customer reviews, and consider visiting physical stores or showrooms to assess the style, comfort, and quality of the furniture sets firsthand.

By choosing a stylish aluminum garden furniture set and following simple cleaning practices, you can create an inviting outdoor space that is both aesthetically pleasing and easy to maintain.

oudoor furniture

Are there eco-friendly or sustainable options for aluminum garden furniture?

Yes, there are eco-friendly and sustainable options available for aluminum garden furniture. When shopping for environmentally conscious choices, consider the following:

1. Recycled Aluminum:

Look for aluminum garden furniture that is made from recycled materials. Using recycled aluminum helps reduce the demand for new raw materials and minimizes the environmental impact of the manufacturing process. Some manufacturers specifically highlight their use of recycled aluminum in their products.

2. Sustainable Manufacturing Practices:

Choose brands or manufacturers that prioritize sustainable manufacturing practices. Look for certifications or labels such as Forest Stewardship Council (FSC), Sustainable Furnishings Council (SFC), or Cradle to Cradle that indicate a commitment to responsible sourcing, energy efficiency, waste reduction, and other sustainable practices.

3. Low-impact Coatings:

Consider aluminum garden furniture that uses low-impact coatings or finishes. Traditional painting and coating processes can involve harmful chemicals and contribute to pollution. Opt for furniture that uses eco-friendly, water-based or powder-coated finishes that have lower environmental impact.

4. Longevity and Durability:

Choose aluminum garden furniture that is built to last. Investing in high-quality, durable furniture reduces the need for frequent replacements, which in turn reduces waste. Look for furniture with solid construction, reinforced joints, and corrosion-resistant features to ensure longevity.

5. End-of-life Considerations:

When selecting aluminum garden furniture, consider how it can be recycled or disposed of responsibly at the end of its life. Look for furniture that is designed for disassembly, making it easier to recycle or repurpose the different components. Some manufacturers may provide recycling programs or guidance on proper disposal.

6. Local and Handcrafted Options:

Support local artisans or craftsmen who create aluminum garden furniture using sustainable practices. Choosing locally made furniture reduces transportation emissions and supports local economies.

7. Second-hand and Vintage:

Consider purchasing second-hand or vintage aluminum garden furniture. This option extends the lifespan of the furniture and reduces the demand for new production. Look for local thrift stores, online marketplaces, or community platforms for pre-owned furniture.

By considering these eco-friendly and sustainable options, you can make more environmentally conscious choices when selecting aluminum garden furniture. Remember to research brands, certifications, and manufacturing processes to ensure that the furniture aligns with your sustainability goals and values.

editor by CX 2024-05-17

China Hot selling China Wholesale Modern Outdoor Garden Furniture Home Dining Room Plastic Wooden Table with Good quality

Product Description

Product Parameters

 

Item NO. SC-225 Place of Product ZheJiang , China
N.W. 10KG Modes of packing 1pcs/ctn
Size 120(L)*60(W)*75(H) CM Loading Port ZheJiang
Material Plastic wood+Iron Payment terms 30%tt, 70%tt balance
Color As required Delivery time 25-30days

Product Description

Detailed Photos

SCENE DISPALY

Packaging & Shipping

Company Profile

ZheJiang Senchu Furniture Co., Ltd, Located in Shengfang City, ZheJiang province. Covering an area of 4000 square meters, we now have over 50 employees; and have our own R&D department, QC department, sales department, workshop department ect.
More than 15 years furniture production experience, all of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. We are very happy to share our experiences in interior design with our customer. Our team of modern design engineer can surely help you with your choice of modern decoration for some specify area like home, office, hotel, and some other places. 1 hour reach ZheJiang Port, this is how we keep competitive prices for global valued customers.Every day we load at least 3-4 40’HQ container for our customers, they come from Brazil, America, Singapore, Greece,Argentina, Lebanon……
If there is an item that you like which lists in our products catalogue, Please contact us immediately. We are looking CHINAMFG to forming successful business relationships with new clients around the world in the near future.

Certifications

FAQ

FAQ
1. who are we?
We are based in ZheJiang , China, start from 2017,sell to CHINAMFG Europe(15.00%),Eastern Asia(15.00%),South America(10.00%),Northern Europe(10.00%),Oceania(10.00%),Africa(10.00%),North America(10.00%),Domestic Market(5.00%),Mid East(5.00%),Southeast Asia(5.00%),Western Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
furniture,chairs,tables,sofa,stool

4. why should you buy from us not from other suppliers?
High quality :More than 20 years furniture production experience, all of our products comply with international quality standards Good price and Fast delivery:One hour reach ZheJiang Port Good service: Young international team provide very good service

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese
 

 

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Metal
Style: Modern
Usage: Beach, Park, Restaurant, Cafe
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

oudoor furniture

What are the best practices for assembling and maintaining outdoor furniture with glass tops?

Assembling and maintaining outdoor furniture with glass tops requires careful attention to ensure proper installation and long-term durability. Here are some best practices to consider:

1. Assembling Outdoor Furniture:

Follow the manufacturer’s instructions carefully when assembling outdoor furniture with glass tops. Ensure that all parts are correctly aligned and securely fastened to prevent any instability or accidents.

2. Handle with Care:

When handling glass tops, wear protective gloves and take care to avoid dropping or banging them against hard surfaces. Glass can be fragile, so handle it with caution to prevent cracks or damage.

3. Use Protective Pads or Cushions:

Place protective pads or cushions between the glass top and the frame to prevent direct contact and reduce the risk of scratches or chipping. These pads also help provide stability and prevent the glass from sliding or shifting.

4. Avoid Excessive Weight or Pressure:

Avoid placing excessive weight or applying strong pressure on the glass top. Glass can be susceptible to breaking or cracking under heavy loads or impact. Use caution when placing objects on the surface and avoid sitting or standing on the glass top.

5. Clean Regularly:

Regularly clean the glass top using a mild glass cleaner and a soft, non-abrasive cloth or sponge. Avoid using harsh chemicals or abrasive materials that can scratch or damage the glass. Wipe away any spills or debris promptly to prevent staining.

6. Protect from Extreme Temperatures:

Avoid exposing outdoor furniture with glass tops to extreme temperature changes. Sudden temperature variations can cause the glass to expand or contract, leading to potential cracking or breakage. Consider using protective covers or moving the furniture to a shaded area during extreme weather conditions.

7. Inspect for Damage:

Regularly inspect the glass top for any signs of damage, such as cracks, chips, or loose fittings. If you notice any issues, address them promptly. Repair or replace the glass as necessary to maintain the integrity and safety of the furniture.

8. Store During Winter or Inclement Weather:

If possible, store outdoor furniture with glass tops indoors or in a covered area during the winter or periods of inclement weather. This protects the glass from potential damage caused by freezing temperatures, snow, or heavy rain.

9. Follow Safety Guidelines:

Adhere to safety guidelines provided by the manufacturer and any local regulations regarding the use and maintenance of outdoor furniture with glass tops. These guidelines may include weight restrictions, recommended cleaning methods, or other specific instructions to ensure safe and proper use.

By following these best practices, you can assemble and maintain outdoor furniture with glass tops effectively, promoting longevity and enjoyment of your outdoor living space.

oudoor furniture

What should I look for in outdoor furniture covers to protect against rain and sun?

When selecting outdoor furniture covers to protect against rain and sun, there are several factors to consider. Here are some key features to look for:

1. Waterproof or Water-Resistant Material: Look for covers made from waterproof or water-resistant materials to protect your outdoor furniture from rain. Materials such as polyester, vinyl, or specially coated fabrics are effective in repelling water and preventing it from seeping through the cover and damaging the furniture.

2. UV Protection: Sun exposure can cause fading, discoloration, and deterioration of outdoor furniture. Ensure that the covers you choose offer UV protection to shield your furniture from harmful UV rays. Look for covers made from materials with UV-resistant coatings or those specifically designed to block UV radiation.

3. Durable Construction: Outdoor furniture covers should be constructed with durable materials and strong stitching to withstand the elements. Look for covers with reinforced seams and high-quality materials that can resist tearing and abrasion. Reinforced corners or straps can also help secure the covers in place during windy conditions.

4. Proper Fit: It’s important to choose covers that fit your outdoor furniture properly. Covers that are too small may not provide adequate protection, while those that are too large may be prone to being blown away or collecting water. Look for covers with adjustable straps, drawstrings, or elastic hems that allow you to secure them snugly around the furniture.

5. Breathability: While it’s essential for outdoor furniture covers to be waterproof, they should also be breathable to prevent the buildup of condensation and promote airflow. Look for covers with vents or mesh panels that allow moisture to escape, reducing the risk of mold or mildew formation.

6. Ease of Use and Maintenance: Consider covers that are easy to put on and take off your outdoor furniture. Covers with features like zipper closures, Velcro straps, or buckles can make the process more convenient. Additionally, look for covers that are easy to clean and maintain, as they will require periodic washing to remove dirt, debris, and stains.

7. Warranty: Check if the outdoor furniture covers come with a warranty. A warranty indicates that the manufacturer stands behind the quality and durability of their product.

When purchasing outdoor furniture covers, it’s advisable to measure your furniture dimensions accurately and choose covers that are designed for your specific furniture type or style. This will ensure a better fit and optimal protection.

oudoor furniture

Are there any eco-friendly options available for outdoor furniture?

Yes, there are several eco-friendly options available for outdoor furniture that prioritize sustainability and minimize environmental impact. Here are some eco-friendly options to consider:

1. Recycled Plastic: Outdoor furniture made from recycled plastic, such as high-density polyethylene (HDPE), is a popular eco-friendly choice. This material is derived from post-consumer plastic waste, including plastic bottles and containers, and can be recycled again at the end of its life. Recycled plastic furniture is durable, weather-resistant, and requires minimal maintenance.

2. Sustainably Sourced Wood: If you prefer the natural look of wood, opt for outdoor furniture made from sustainably sourced wood, such as teak or eucalyptus. Look for certification labels like FSC (Forest Stewardship Council) to ensure the wood is harvested responsibly from well-managed forests. These types of wood are known for their durability and resistance to weathering.

3. Bamboo: Bamboo is a fast-growing and renewable resource that can be used to create outdoor furniture. It is a durable and lightweight material that offers a natural and tropical aesthetic. Bamboo furniture is often treated to enhance its weather resistance and longevity.

4. Aluminum: Aluminum is a highly recyclable material that is commonly used in outdoor furniture. Look for furniture made from recycled or responsibly sourced aluminum. It is lightweight, rust-resistant, and requires minimal maintenance.

5. Natural Fiber Wicker: Wicker furniture made from natural fibers, such as rattan or seagrass, is another eco-friendly option. These materials are renewable and biodegradable. Look for furniture that uses natural fiber wicker and avoids synthetic or PVC-based wicker.

6. Upcycled or Reclaimed Materials: Consider outdoor furniture made from upcycled or reclaimed materials, such as reclaimed wood or repurposed metal. These options give a new life to materials that would otherwise go to waste and contribute to landfill waste reduction.

7. Minimalist Designs and Longevity: Opting for minimalist designs and furniture with long lifespans can also be eco-friendly. Choosing timeless pieces that are built to last reduces the need for frequent replacements and helps minimize waste.

When looking for eco-friendly outdoor furniture, it’s important to research the materials, production processes, and certifications associated with the products. Look for eco-labels or certifications that indicate the furniture meets specific environmental standards.

By choosing eco-friendly outdoor furniture, you can create a sustainable and environmentally conscious outdoor space.

editor by CX 2024-05-17

China Custom Folding Multi-Functional Coffee Table Dining Table High Quality CHINAMFG Alloy Camping Easy Table vacuum pump electric

Product Description

FAQ

Q1:Can you accept OEM/ODM services?
Yes, we can. We have our own supply chain.

Q2:What is your delivery time?
Usually, we guarantee within 25 days. If your purchase volume is large or you need customized products, this may take some time.

Q3:How to ensure your quality?
We can send you samples for your inspection, and you only need to pay the sample fee and shipping fee for the first time. However, don’t worry, the sample fee will be deducted from your next order.

Q4:How is the after-sales service?
During the warranty period, if there are any issues with the product, our technical personnel will first provide a solution. If the product still has problems, it will be returned or exchanged for free.

Q5:Do you have any product qualification certifications?
Our products not only have quality testing certificates issued by authoritative domestic certification agencies, but also inspection certificates issued by foreign testing agencies-CE SGE….

Q6:Can we print our own brand?
Yes, you can have your own logo on the product.

Q7:What is your transportation method?
Express delivery, air freight, sea freight. We can fully comply with your requirements.
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Aluminum Alloy
Style: European
Kind: Camping Folding Table
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

oudoor furniture

What are the ideal cleaning and maintenance practices for aluminum folding tables?

To keep your aluminum folding tables in optimal condition, it’s important to follow proper cleaning and maintenance practices. Here are some ideal practices to consider:

1. Regular Cleaning:

Perform regular cleaning to remove dirt, debris, and spills from the surface of the table. Use a soft cloth or sponge dampened with mild soap and water to wipe down the table. Avoid using abrasive cleaners or harsh chemicals that can damage the aluminum finish.

2. Removing Stubborn Stains:

If you encounter stubborn stains on the table surface, you can use a non-abrasive cleaner specifically formulated for aluminum surfaces. Apply the cleaner according to the manufacturer’s instructions and gently scrub the stained area with a soft cloth or sponge. Rinse thoroughly with clean water and dry the table completely.

3. Avoiding Scratches:

Minimize the risk of scratches on the table surface by using placemats, coasters, or tablecloths when placing objects on the table. Avoid dragging rough or sharp objects across the surface, as they can scratch the aluminum finish.

4. Protecting the Finish:

Consider applying a protective coating or wax specifically designed for aluminum surfaces. This can help protect the table’s finish from oxidation, scratches, and other damage. Follow the manufacturer’s instructions for application and reapplication as needed.

5. Drying Thoroughly:

After cleaning or exposure to moisture, ensure the table is thoroughly dried to prevent water spots or potential damage. Use a clean, dry cloth to wipe down the table and remove any remaining moisture.

6. Proper Storage:

When not in use, store your aluminum folding table in a dry and sheltered area. Avoid storing it in direct sunlight or exposed to harsh weather conditions, as prolonged exposure can cause damage to the table’s finish or structural integrity. If possible, use a protective cover to shield the table from dust and debris.

7. Regular Inspection:

Periodically inspect your aluminum folding table for any signs of damage, loose parts, or structural issues. If you notice any problems, address them promptly to prevent further damage or potential safety hazards.

By following these ideal cleaning and maintenance practices, you can extend the lifespan of your aluminum folding tables and keep them looking their best for years to come.

oudoor furniture

What are the advantages of using aluminum folding tables for outdoor events?

Aluminum folding tables offer several advantages that make them an excellent choice for outdoor events. Here are some of the benefits of using aluminum folding tables:

1. Portability:

Aluminum folding tables are lightweight and easy to transport. They can be folded into a compact size, making them convenient to carry and load into vehicles. This portability is especially valuable for outdoor events where tables need to be set up and taken down quickly and efficiently.

2. Easy Setup and Storage:

Aluminum folding tables are designed for easy setup and storage. They typically feature a folding mechanism that allows them to be unfolded and set up in seconds. When not in use, they can be folded back into a compact size for convenient storage. This ease of setup and storage makes them ideal for events with limited time and space.

3. Durability:

Aluminum folding tables are known for their durability. Aluminum is a sturdy material that can withstand outdoor conditions such as rain, sun exposure, and temperature changes. It is resistant to rust and corrosion, ensuring that the tables can maintain their structural integrity even with frequent use in outdoor environments.

4. Weather Resistance:

Outdoor events are susceptible to various weather conditions, and aluminum folding tables are designed to withstand them. They are resistant to moisture, UV radiation, and temperature fluctuations, which means they won’t warp, fade, or deteriorate when exposed to the elements. This weather resistance ensures that the tables can maintain their appearance and functionality throughout the event.

5. Versatility:

Aluminum folding tables come in various shapes and sizes to accommodate different event needs. They can be found in rectangular, square, or round shapes, and in different dimensions to suit various seating arrangements. This versatility allows event organizers to customize the table setup according to their specific requirements.

6. Low Maintenance:

Aluminum folding tables require minimal maintenance. Their smooth and sealed surfaces are easy to clean with a mild soap and water solution. Unlike tables made of wood or other materials, aluminum tables do not require regular staining or sealing to maintain their appearance and functionality.

7. Cost-Effective:

Aluminum folding tables are often more cost-effective compared to tables made of other materials like wood or high-end metals. They offer a balance between affordability and durability, making them a practical choice for outdoor events where budget considerations are important.

These advantages, including portability, easy setup and storage, durability, weather resistance, versatility, low maintenance, and cost-effectiveness, make aluminum folding tables a popular and practical option for outdoor events. They provide a convenient and reliable surface for various activities, from dining to displaying merchandise, enhancing the overall experience for event organizers and attendees alike.

editor by CX 2024-05-17

China OEM Wholesale Home Garden Aluminium Pool Furniture Dining Chair Table Set vacuum pump design

Product Description

Welcome to Visit Brite Hospitality Solutions!
Wholesale Home Garden Aluminium Pool Furniture Dining Chair Table Set

CHINAMFG outdoor furniture sets are popular choices for gardens due to their durability, lightweight nature, and resistance to rust and corrosion.
Aluminum Construction: The furniture pieces, including the dining chairs and table, are typically made of aluminum or aluminum alloy. This material is lightweight, making it easy to move around, yet strong enough to withstand outdoor elements.
Design and Style: CHINAMFG outdoor furniture sets come in various designs and styles to suit different tastes and preferences. Whether you prefer a modern, minimalist look or a more classic design, there are options available to complement your garden aesthetics.

Name: Aluminium Outdoor Indoor Chair Table Sets
Material: Aluminium frame
Color: Red, Yellow, White color option available
Feature: heavy duty with big capacity, colorful and stylish
Size: W480*D605*H855mm
Service: OEM & ODM & Trial order & Door to door shipping
Capacity: Up to 200kgs
Package: by carton 10pc/ctn

Detailed Photos

     

 

 

Packaging & Shipping

 

Package Way: Standard export carton
Packing Size: 10pc/ctn, 50*63*145cm
Delivery Lead time: Sample order 3-5 days, bulk order 15~20days fast delivery 

 

Company Profile

Our Advantages

a, Over 15 years’ experience in production and exporting of hotel supplies!

b, Focus on Custom Made projects, provide one-stop hospitality solutions, OEM&ODM available! 

c, Providing our products and services to world-known five-star hotels!

d, Our own Quality Control team, who ensure the highest standard of product to ensure production is always as per specification, we also work with approved labs for all testing requirements!

e. Have advanced equipment, like 5000 watt laser cutting machine, CNC shearing machine, bending machine, planer,step punching machine, turret punching machine, welding machine etc. We stand behind premium craftsmanship last over years!We hope to cooperate with you for mutual development and benefits. If you are seeking for an innovatory, CHINAMFG and energetic team as your business partner, please feel free to contact us at any time.  

FAQ

Payment

T/T, L/C, Western Union, Money Gram

Delivery Details

For small items, we can send them by DHL, UPS, China post and airfreight.

For bulk order, sea shipping with reasonable price will be recommended. It can save you much shipping charges. The documents of customs clearance will be prepared soon after container loading.

Quality Control

LEGEND follows manufacturing standard of H.A.C.C.P system strictly. To ensure longer service lifetime, the key parts are used with professional brand. We care about our users. That is why we can focus on each small detail. Each item will be checked carefully before loading. The inspection & loading pictures will be sent to you.

Warranty Terms

1-year warranty. To be honest, it is hard to execute warranty policy when the goods are out of China. For some items, we will suggest you purchase some key parts for longer service lifetime.

Commercial Kitchen, Restaurant, Hotel Design & Consult

More than 15 years restaurant & hospitality industry experience can assist you in opening of Commercial Kitchen, Restaurant, Hotel easily. After getting your building layout, professional CAD plan and M&E drawing for electricity & plumbing will be provided soon.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Metal
Style: Simple
Folded: Folded
Samples:
US$ 40/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

oudoor furniture

Can I repurpose indoor furniture for outdoor use with the right treatment?

Repurposing indoor furniture for outdoor use is possible with the right treatment and considerations. Here are some important points to keep in mind:

1. Furniture Material:

Consider the material of the indoor furniture before repurposing it for outdoor use. Certain materials are better suited for outdoor conditions, such as teak, aluminum, wrought iron, and certain types of synthetic materials. These materials are more resistant to moisture, UV rays, and other outdoor elements.

2. Moisture and Waterproofing:

Outdoor environments expose furniture to moisture, rain, and humidity. To repurpose indoor furniture for outdoor use, it’s essential to ensure it is adequately protected against moisture. Use waterproofing treatments, sealants, or outdoor-grade paints to create a protective barrier that prevents water absorption and helps prevent warping, rotting, or mold growth.

3. UV Protection:

Indoor furniture is not designed to withstand prolonged exposure to direct sunlight. UV rays can cause fading, discoloration, and deterioration of materials. Apply UV-resistant finishes or use protective covers to shield the repurposed furniture from excessive sunlight. Additionally, consider placing the furniture in shaded areas to minimize direct UV exposure.

4. Maintenance Requirements:

Outdoor furniture typically requires more maintenance compared to indoor furniture. Before repurposing indoor furniture, be prepared to invest time and effort into regular cleaning, inspections, and maintenance. Follow the manufacturer’s instructions for care and maintenance, including cleaning techniques, recommended cleaning products, and frequency of maintenance tasks.

5. Consider Climate and Weather:

Take into account the climate and weather conditions of your area. If you live in an area with extreme temperatures, high humidity, or frequent rain, the repurposed indoor furniture may be more susceptible to damage. Assess whether the furniture can withstand the local climate and weather patterns before repurposing it for outdoor use.

6. Safety Considerations:

Ensure that repurposed indoor furniture is safe for outdoor use. Check for stability, structural integrity, and any potential hazards. Outdoor furniture needs to withstand environmental factors such as wind, rain, and uneven surfaces. Reinforce or repair any weak or damaged areas to ensure the safety of users.

7. Longevity and Lifespan:

Repurposed indoor furniture may have a shorter lifespan when used outdoors due to the harsher conditions. Consider the expected longevity of the repurposed furniture and determine if it aligns with your needs and expectations. Keep in mind that even with proper treatment, the furniture may still wear out faster than purpose-built outdoor furniture.

8. Personal Style and Aesthetics:

Repurposing indoor furniture for outdoor use allows you to bring your personal style and aesthetics into your outdoor space. Consider the design, colors, and overall look of the furniture to ensure it complements your outdoor environment and desired aesthetic.

While it is possible to repurpose indoor furniture for outdoor use with the right treatment, it’s important to carefully evaluate the suitability of the furniture and consider the factors mentioned above. Adhering to proper treatment methods and maintenance routines can help extend the lifespan of repurposed furniture and enhance your outdoor living experience.

oudoor furniture

Can I find garden furniture that is both stylish and easy to clean?

Yes, it is possible to find garden furniture that is both stylish and easy to clean. With advancements in materials and design, there are numerous options available that combine aesthetic appeal with practicality. Here are some types of garden furniture that offer both style and easy maintenance:

1. Outdoor Wicker Furniture:

Outdoor wicker furniture is a popular choice for stylish outdoor spaces. It is typically made from synthetic wicker or resin wicker, which are resistant to weather conditions, UV rays, and easy to clean. Simply wipe the furniture with a damp cloth or use a mild soap and water solution for tougher stains. Wicker furniture is available in a variety of colors and styles, allowing you to find a design that suits your taste.

2. Metal Furniture with Powder Coating:

Metal furniture, such as aluminum or steel, can be stylish and easy to clean when it is powder-coated. Powder coating involves applying a dry powder paint to the metal surface, which then fuses into a protective layer. This coating not only adds style with a range of color options but also provides durability and makes the furniture easy to wipe clean. Metal furniture with powder coating is resistant to rust, fading, and chipping.

3. Teak Wood Furniture:

Teak wood furniture offers a timeless and elegant look for outdoor spaces. It is naturally resistant to moisture, decay, and insects. Teak wood contains oils that help repel dirt and stains, making it relatively easy to clean. Regular maintenance involves cleaning the furniture with a mild soap and water solution and applying teak oil periodically to maintain its appearance. Teak furniture is available in various designs and can enhance the style of any garden.

4. Plastic or Resin Furniture:

Plastic or resin furniture is known for its low maintenance and wide range of styles. This type of furniture is lightweight, durable, and resistant to weather elements. It can be easily cleaned with a sponge or cloth and a mild detergent. Plastic or resin furniture is available in different colors and designs, allowing you to find options that match your preferred style.

5. Outdoor Fabrics:

In addition to furniture materials, considering the fabrics used for cushions and upholstery can contribute to both style and easy maintenance. Look for outdoor fabrics that are specifically designed to withstand UV rays, moisture, and stains. These fabrics are often water-resistant or water-repellent and can be easily cleaned with a damp cloth or mild soap and water solution.

By choosing garden furniture made from materials that are easy to clean and maintain, you can enjoy both style and convenience in your outdoor space. Regular cleaning and proper care will help preserve the appearance and longevity of your furniture, allowing you to enjoy it for years to come.

oudoor furniture

How do I clean and maintain my garden furniture to keep it looking new?

To keep your garden furniture looking new and well-maintained, regular cleaning and proper maintenance are essential. Here are some steps you can follow to clean and maintain your garden furniture:

1. Read the Manufacturer’s Instructions:

Before cleaning your garden furniture, refer to the manufacturer’s instructions and guidelines. Different materials and finishes may require specific cleaning methods or products. Adhering to the manufacturer’s recommendations ensures that you don’t accidentally damage the furniture.

2. Remove Debris:

Start by removing any loose dirt, leaves, or debris from your furniture. Use a soft brush or a cloth to gently sweep away the debris. Pay attention to crevices and corners where dirt may accumulate.

3. Clean with Mild Soap and Water:

For most types of garden furniture, a solution of mild soap and water is sufficient for cleaning. Mix a small amount of mild dish soap or a gentle outdoor furniture cleaner with water. Use a sponge or a soft cloth to clean the surfaces of the furniture, including the frames, tabletops, and seating areas. Rinse thoroughly with clean water afterward.

4. Address Stains Promptly:

If you notice any stains on your furniture, address them promptly. Blot liquid stains with a clean cloth and mild soap solution. For tougher stains, you may need to use a specialized cleaner recommended for the specific material of your furniture. Follow the instructions on the cleaner and test it on a small, inconspicuous area before applying it to the entire surface.

5. Treat Wooden Furniture:

If you have wooden garden furniture, additional care is required. Regularly inspect the wood for signs of cracking, peeling, or discoloration. If necessary, sand the surface lightly and apply a protective finish or outdoor furniture oil to maintain its appearance and protect it from moisture.

6. Maintain Metal Furniture:

Metal garden furniture may require occasional maintenance to prevent rust or corrosion. Check for any signs of rust and remove it using a wire brush or sandpaper. Apply a rust-resistant paint or a protective spray to any exposed metal surfaces.

7. Store or Cover:

When not in use, consider storing your garden furniture indoors or covering it with weatherproof furniture covers. This protects the furniture from the elements and extends its lifespan. Ensure that the furniture is clean and dry before covering or storing it to prevent the growth of mold or mildew.

8. Regularly Inspect and Repair:

Periodically inspect your garden furniture for any signs of wear, loose screws, or damaged parts. Tighten any loose screws or bolts and make necessary repairs promptly to prevent further damage.

By following these cleaning and maintenance practices, you can keep your garden furniture looking new and prolong its lifespan. Regular care and attention will help preserve its appearance and functionality for years to come.

editor by CX 2024-05-17